NEO WI-FI Convector Heaters
Neo WI-FI Convector heaters are available in a range of length’s and wattages. The compact panel heaters and skirting heaters combine advance technology with functional design. They are simple to install, user friendly and are double insulated and splashproof making them ideal to use in bathrooms.
New generation heaters ADAX NEO with Wi-Fi thermostat, contemporary, elegant, slim line form eminently suits modern interiors.
Colours available, White, Pearl Black & Sparkling Grey.
System requirements: Wi-Fi router must be set up with 2,4 GHz with WPA2 under installation.
In addition, the heater has the following functions:
Please note. It is important to check that the room intended for the installation of the heater has a strong wifi signal from the router. If not then this can be rectified by purchasing a plug-in wi-fi extender to boost the signal.
Please see our accessories page for a freestanding option.
|DEPTH TO WALL (CM)||8.7||8.7||8.7||8.7||8.7||8.7||8.7||8.7||8.7||8.7||8.7||8.7||8.7|
|CLEAR DISTANCE BELOW||5||5||5||5||5||5||5||5||5||5||5||5||5|
|CLEAR DISTANCE SIDE WAYS||5||5||5||5||5||5||5||5||5||5||5||5||5|
|CLEAR DISTANCE ABOVE||15||15||15||15||15||15||15||15||15||15||15||15||15|
|VOLTAGE 220 V- 240 V
|Front panel’s Surface temperature – Maximum 75°C at 20°C room temperature
Colour – White, Pearl Black & Sparkling Grey
Delivered with 1,3m long cable with plug.
Accuracy of the thermostat – 0,5°C at 20°C room temperature
On/off switch and WI-FI thermostat
Splash security IP24 (suitable for wet areas)
5 year warranty
Out of stock items will need pre ordering and full payment will be required. Please note, at times there may be a delay in the receipt of orders from Norway especially during the summer months. (please email for more information on delivery time if the product is out of stock) installation is not included or possible when ordering online.
The heater flex cable comes out of the top right of the heater as you look at the heater on the wall. For plug sockets to the left of the heater or not within reach, please purchase the accessory junction box, KRB200. This enables you to extend the cable to a length that is required to reach the socket.
All of our heaters must be fitted in a horizontal position with the vents at the top. For maximum efficiency all heaters should be fitted with the bottom of the heater 5 cm from the floor when possible. If these guidelines are not followed, a vast amount of efficiency will be lost.
It is the responsibility of the customer to ensure that the electrical supply within the property is sufficient to support the products supplied by Neater Heater.
Please note that some household sockets in Spain and Portugal are not earthed. please check before using or ask a qualified electrician.
Purchases in Gibraltar will need collecting from the MRW office in Línea De La Concepción, Cadiz and may be subject to import duties, payable by the purchaser.
Prices correct as of November 14th 2022.