Um in der deutschen Download einer Broschüre
Klicken sie hier fur Deutsch
Using the latest materials and technology Neater Heaters heating systems are manufactured in Europe to the highest standards and come with a five year warranty. Testing has shown that the reduced running costs of our heating systems over their "competition" can produce considerable annual savings for the customer. Why is this?
Our heating systems use Convection principals and are designed so that the electricity you put into the heater is converted to heat as cheaply as possible. Quite simply: When you turn on the heater the element warms up rapidly and heats the air around it, this air rises and draws more cold air into the heater. Because the element is extremely efficient and is designed to have a huge surface area a large quantity of air is heated very quickly. If your room has the correct sized heater it will take about twenty minutes to warm up from cold, after which the heater eases off and works at about two thirds capacity, (depending on various external influences).
The Norwegian based design and engineering make Neater Heater systems among the most efficient electric heaters for our Spanish climate. Convector heaters warm the air around you and provide a pleasant ambient heat for your home. Neater Heaters do it better, and cheaper, than the “Competition”.
Whether you are choosing from the stylish Glamox or Beha ranges, or the more utilitarian Vigo or Adax Standard ranges, you can be confident that you will have an efficient cost-effective heater with safety and quality assured. For modern interiors, or where a splash of colour may be desired, the slim and elegant design of the Adax Neo fits right in. The Neo is both smart and clever, with a digital display and an in-built day and night temperature reduction, it can provide a further 25% reduction in running costs.
All our heating systems are available as normal Panel Heaters or low-profile skirting board heaters. They can also all be supplied with feet to provide a stand-alone option.
We also offer a few solutions to some of life’s chilly problems. Whether you need our “Welly warmer” hot air blower (designed to warm ski boots, or dry out soaking football boots overnight), or a warm air blowing footrest for office workers in cold offices, factories, or workshops. Neater Heater may have just the right Neat solution for you.
Beha, Adax and Vigo heating systems
Order your heaters here online, with free delivery throughout
Spain, France and Portugal direct to your home,
Convector Heaters versus Infrared.
Most customers come to Neater Heater having already made a decision to use electric heating. They are then faced with a bewildering choice of heating options.
Richard and Tony from Neater Heater have explained, at length, why their convector heaters are the best in their category. However, one of the questions they are constantly asked is
“What is the difference between convector heating and Infrared heating?”
There are three ways that heat energy is distributed: Conduction; Convection; and Radiation.
Conduction. If you touch the metal handle of a metal saucepan you will burn your hand, because the metal has conducted the heat efficiently. If the handle was wooden, you would not burn your hand as wood is a bad conductor of heat, and absorbs the energy into itself.
Convection. Hot air rises. This is known as convection. As a Neater Heater element warms up, it heats the air around it. Because the element is designed to have a huge surface area it does this very quickly and efficiently. As the hot air rises out of the top of the heater it is replaced by cold air that is drawn into the bottom of the heater. This cold air, in turn, is rapidly heated and rises. The warm air now rises to the ceiling and spreads out until it starts filling the room, from the top, with warm air. After about twenty minutes (with the right sized heater) the air in the room is warm and the thermostat starts to reduce consumption.
Radiation. A source of radiated heat will warm objects in a direct line of sight with it for
a certain distance. Infrared Heaters and Kebab cookers does this very well, they both heat objects facing them and nothing else; the air remains cold. This is why the kebab has to rotate. Also, if you put another object between you and the radiation heat source, you are now in the shadow, and are no longer being heated. Infrared is a very effective heating choice in certain, specific, situations, but has a huge “Achilles Heel” if being used for general heating.
The advantage of infrared would be if you had a huge area to heat like a large open-plan- living room, or a Naya. Here you would not choose a convector heater, but you could use an infrared heater to warm objects (you) in a specific part of the room; maybe by the television. However, the minute you move away from this small area you would start feeling cold again as you are no longer within its range.
If you were sat at a dining table in winter, your bodies would be warm, but your legs
and feet, in the shadow caused by the table, could be like lumps of ice. A convector heater, however, would warm all the air in the room, including that occupying the space
under the table.
Infrared sales people state that their heaters warm objects which, in turn, radiate heat back into the room. This might work in a world of insulated properties, but in Spain the walls will just lose the heat to the outside due to lack of insulation, and wooden furniture will absorb the heat as demonstrated by the fact that we use wooden handles on saucepans.
Neater Heaters are designed to heat up the air in a non-complicated way.
It also helps that they look good as well.
Some Customers’ questions explained.
Gas, or Oil, powered central heating systems?